Aruba AP-205 APIN0205 802.11ac 2x2 MIMO Dual Band Access Point PoE Gigabit Wty

Aruba AP-205 — 802.11ac Dual-Band Access Point

The Aruba AP-205 (APIN0205) is a dual-radio 802.11ac access point with 2×2:2 MIMO, integrated omnidirectional antennas, Gigabit Ethernet, and 802.3af PoE power. Suited to medium-density offices, retail floors, and education spaces, it operates under an Aruba mobility controller or in controllerless Instant mode. Backed by a 12-month Reboot IT warranty.

Key Benefits

• 802.11ac dual-radio: Concurrent 2.4 GHz and 5 GHz radios deliver up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz, keeping modern and legacy clients on separate bands.
• 2×2:2 MIMO: Two spatial streams match the antenna configuration of most laptops, tablets, and phones — the AP is not the bottleneck for typical client hardware.
• Instant mode capability: Can run controllerless as an Aruba Instant AP, letting smaller sites deploy enterprise Wi-Fi without the cost of a mobility controller.
• 802.3af PoE powered: Standard 802.3af PoE means it works with the PoE switching most offices already have, without needing a PoE+ upgrade.
• Integrated antennas: Internal omnidirectional antennas give a clean, flush profile for ceiling mounting in customer-facing and open-plan spaces.
• Enterprise security: Supports WPA2-Enterprise with 802.1X authentication, multiple SSIDs, and VLAN segregation for guest and corporate network separation.

Performance in Use

The AP-205 is a solid medium-density workhorse. It handles the everyday office pattern — laptops, phones, a printer or two, a handful of tablets — without strain, and its 2×2:2 radio configuration is well matched to the client devices most people actually carry. Chasing a 3×3 or 4×4 AP delivers little benefit when client hardware is 2×2, which the overwhelming majority is.

Deployment flexibility is the AP-205's strongest practical feature. In Instant mode, one AP takes the role of virtual controller and the rest join it, so a site of five or ten APs can run enterprise-grade Wi-Fi with no controller hardware at all. Larger sites can convert the same hardware to controller-managed operation later without replacing access points.

Power requirements are modest and worth highlighting: the AP-205 runs on standard 802.3af PoE, unlike Wave 2 units that demand 802.3at PoE+. For anyone upgrading Wi-Fi on existing switching, that difference often decides whether the project needs new switches. Gigabit uplink is sufficient for an 802.11ac Wave 1 AP of this class.

Technical Specifications

Is It Right for You?

Condition Grades

Frequently Asked Questions

Does the AP-205 need an Aruba controller?

Not necessarily. It can run in Aruba Instant mode, where one AP acts as a virtual controller for the group. It can also be converted to operate under an Aruba mobility controller if you have one.

Will 802.3af PoE power it?

Yes. The AP-205 runs on standard 802.3af PoE, so it works with most existing PoE switches without requiring a PoE+ upgrade.

Is a power adapter or PoE injector included?

No. The access point unit is supplied on its own. Power comes from your PoE switch or a separately purchased injector or adapter.

How many clients can it handle?

The AP-205 is rated for medium-density deployment and comfortably handles a typical office floor. For very high client counts in a single space, a Wave 2 or Wi-Fi 6 access point is the better choice.

Does it support Wi-Fi 6?

No. The AP-205 is an 802.11ac Wave 1 access point. Wi-Fi 6 client devices will connect normally but at 802.11ac speeds.

What are the shipping options?

Free standard shipping across Australia.

Warranty & Support